|
DX SABERS INSTRUCTIONS: HOW TO USE DXE SERIES NEOPIXEL) ASSEMBLY: Take the small bag with the L shaped allen key wrench and the very tiny fastening screws. There are small holes around the top of your lightsaber hilt (handle). Put your blade into your DX Saber Hilt (handle) and screw the small screws into the holes until they are nice and tight against the blade. Then you are ready to go!! TURN ON SABER: Hold down the button for 3-5 seconds until you hear a noise and the blue circle is lit indicating that it is alive and out of sleep mode. Then you can simply click the button and the lightsaber will light up! VOLUME CONTROL: While the saber is not lit, triple click the button until you hear the saber sound at “30%" OR “60%," or “100%," OR no sound which indicates if it is muted. If the saber is lit, you can triple click the button and the saber will mute. CHANGE SOUND FONTS: While the saber is not lit, double click the button until you hear the next character speak indicating the character's lightsaber sounds you have chosen. When the lightsaber is on you can double click the button to change sound fonts as well. CHANGE COLORS: While the saber is lit up, hold the button down and while holding the button rotate you wrist and the colors and blade effects will change slowly so you can choose from an infinite set of colors! Once you see the color you like rotate your wrist to turn it off. Do not take your finger off the button or the colors will also stop changing but your color won’t be saved. BLASTER REFLECTION EFFECT: While the saber is lit, click the button one time for a blaster reflection effect! LIGHTSABER FLASH ON CLASH EFFECT: When the lightsaber experiences contact it will emit a noise and a point on the blade where there is an impact showing flash on clash. LOCKUP (LIGHTSABER AGAINST LIGHTSABER EFFECT): When the lightsaber is lit, hold the button down and the lightsaber will create a lockup effect upon impact and keep the button held to continue the effect! To release the effect just release your finger from the button. TURN OFF: When the lightsaber is lit, hold the button down for about 5 seconds until it becomes not lit. SLEEP MODE: When the lightsaber is NOT lit, click the button 5 or 6 times and it will go into sleep mode. THIS DOCUMENT SERVES AS DX SABER HAS A LIFETIME WARRANTY WITH FREE REPAIRS MORE INSTRUCTIONS ARE ON OUR WEBSITE - DXSABERS.COM IF YOU ARE HAVING ISSUES OR YOU CAN EMAIL US AT CUSTOMERSERVICE@DXSABERS.COM |
